The Extended Sink Flange is required for sinks greater than 1 3/4" thick. The polished surface of this stainless steel flange will complement most stainless steel sinks. For more information, call the Answerline at 1-800-558-5700. Note: Use of abrasive cleaning solutions may harm this product's finish.
Out of Stock
Reviews / Q&A
Extended Stainless Steel Sink Flange is rated out of 5 by 5.
Rated 5 out of 5 by Stldesign from Good product but why so expensive??? When compared with price of normal mounting flange the cost is too high.
Date published: 2016-08-03
Rated 4 out of 5 by Shirley33 from Easy ti install One of guys in the field says it was so easy to out in. Good quality
Date published: 2016-01-15
Rated 2 out of 5 by Duke103 from Does what it should This product is simply an extended garbage disposal flange. It functions as it should. Nothing more. Which doesn't justify the RIDICULOUS PRICE! The price of this item is completely irrational.
Date published: 2016-01-03
Rated 5 out of 5 by Tomthumbless from Way way OVERPRICED There should be a model offered with the extended flange for people whose sink requires one.
Date published: 2015-06-02
Rated 4 out of 5 by Ursolan from Does the job, but for the cost, I feel like I'm partially paying for the machine that makes these. This is the cheapest extended sink flange I was able to find after looking for about two weeks at local hardware and plumbing stores. It's hard to believe that a normal sized sink flange with the quick lock hardware is only $15.99, and this one is almost four times that, and it doesn't come with the quick lock. It does the job though, and It looks nice and is well made.
Date published: 2015-02-07
I have a farm sink and bought a extended flange from whitehaus model # wh202_ORB will your batch feed disposal work with this flange or do I need to
buy one that requires one with a switch.
Hi, this is Jerica from InSinkErator Customer Service. We do not recommend that you use an extended sink flange made by a different manufacturer. This may void the warranty of your disposer. If you need an extended sink flange, we have one that can accommodate both batch-feed and continuous-feed type of disposer. Our extended sink flange can accommodate up to 1 ¾” thick sink. I have included the link below for your reference. If you have questions, please do not hesitate to contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you. http://shop.insinkerator.com/p/insinkerator-extended-stainless-steel-sink-flange?pp=24.
Date published: 2015-02-28
Will it work with a 2" thick sink?
I have a concrete sink that is 2" thick on the bottom. Will I be able to purchase a product that will work with a sink that thick?
Hi this is Jerica from InSinkErator Customer Service. The InSinkErator Extended Sink Flange will require a 3 ½” sink hole opening and can accommodate up to 1 ¾” inch thick sink. Unfortunately, we do not have any sink flanges that can accommodate more than 1 ¾” inch thick sink. If you have further questions, you may call us at 1 (800) 558-5700. Thank you.
Date published: 2014-05-10
are these available in black?
Hi Anonymous, This is Jim with InSinkErator. Unfortunately, due to lack of demand, the Extended Sink Flanch is only available in its unfinished stainless steel form. Only our standard Flanges come in a variety of finishes. If you have any other questions or concerns, please feel free to contact our AnswerLine at 800-558-5700. Thank you.
Date published: 2014-03-15
Recommended disposal for a Rohl Apron Sink?
I just purchased a Rohl apron sink model # MS3018WH. Which disposal and accessories are recommended for this sink?
Hi Anonymous, This is Jim with InSinKerator. All our disposals use the same mounting assembly. As long as the sink has a standard 3-1/2" drain there should be no issues with installing any model of InSinkErator disposer. Two considerations when installing the disposer is the thinkness of the sink, (if it is thicker that 3/4" you would need the extended Sink Flange. Sold separately.) and the available cabinet space under the sink. After doing a bit of research I found this on the Rohl web site for your model of sink. Due to sink thickness, ISE-type Disposal with Extended Flange #ISE10082 or ROHL 733 Basket Strainer is recommended. For your convenience, I am including the link below to the download section of our website where you can download the specification sheets of all our available disposers for dimensional information. http://www.insinkerator.com/en-us/Service-Support/Pages/Downloads.aspx I hope I have been able to provide you with the information you needed. If you have any other questions or concerns, please feel free to contact our AnswerLine at 800-558-5700. Thank you.
Date published: 2014-04-19
will it fit ELKAY perfect drain sink with drain size of 3 3/8"
Elkay Innermost Perfect Drain HD 523637
Hi, this is Jerica from InSinkErator Customer Service. An Elkay Perfect Drain Sink no longer requires another sink flange. The drain hole of an Elkay Perfect Drain Sink allows you to mount any InSinkErator disposers without its original flange. This is already integrated into the Perfect Drain Sink bowl. Should you need literature about this, you may send your request to [email protected] and I will process it immediately. Thank you.
Date published: 2015-05-02