The F-1000S Water Filtration System is designed for exclusive use with InSinkErator water dispensing systems. It reduces particulates, chlorine taste and odor, allowing you to enjoy better-tasting hot beverages. It has a 1/4 in. quick-connect fitting and is replaced easily without contact with used filter material.
Out of Stock
- System includes: Filter Head Bracket, F-1000 Replacement Filter, Two Polyethylene Tubes, Quick-Connect Fitting, Two Mounting Screws, 1/4” Compression Fittings
- Reduces particulates, chlorine taste and odor, or clean-tasting water
- NSF standard 42 certified for quality assurance
- We Come To You® 1-Year In-Home Limited Warranty (excludes filter replacement cartridges)
- Designed for exclusive use with InSinkErator water dispensing systems
- Filter head bracket compatible with only F-1000 and F-2000 replacement filters
- Recommended 6 months replacement for optimal performance
- Twist-and-lock design for quick-and-easy filter changes
- Sanitary quick-change filter cartridge
- Automatically shuts water off when filter cartridge is replaced
Reviews / Q&A
Water Filtration System F-1000S is rated out of 5 by 1.
Rated 3 out of 5 by DrJo from Parts unavailable Insinkerator has no parts available. I attempted to purchase one of the hoses from the faucet to the filter and the connector between the copper pipe from the filter and had to purchase a whole new filter system and new faucet. This along with two trips by the plumber cost $800 when I could have fixed the problem with $25.00 worth of parts.
Date published: 2016-02-11
What type of filter is it? Carbon? Carbon block?
Hi, this is Jerica from InSinkErator® Customer Service. We manufacture carbon based filter cartridges. If you have questions, please do not hesitate to contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2016-01-23
I installed the wrong tube into the inlet of the 1000S filter system. How do I remove it as it seems it isn't a quick release?
Hi, this is Jerica from InSinkErator Customer Service. I do apologize for the inconvenience that you encountered with the installation of your filtration system. The filter head’s inlet and outlet ports both have a gray release ring that you can push while you pull on the hose for you to remove it. If you need further assistance regarding this, you may call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2014-11-15
Use of F-201R filration with HWT-F1000S Hot Water Tank
I had a SST-FLTR (which uses a F-201R filter) installed in 2009. The hot water tank was damaged during a power outage, so I purchased a HWT-F1000S replacement. I installed the new hot water tank but since I had purchased extra F-201R filters and the new F-1000 filter system that came with this unit requires a different size water supply line, I just mounted the new heater and reconnected the lines to use continue using the existing F-201R filter. Is this okay for operation of the HWT-F1000S or do I have to install the F-1000 filter system? Thank you.
Hi, this is Jerica from InSinkErator Customer Service. Yes, you can use your F-201 filtration system with your new HWT model. You may then keep the F1000S filtration system for future use. If you have questions, you may contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2015-02-07
We are purchasing the HC 2200 hot / cold water dispenser to be used with the f1000 filtration and tank.
Does the filter work for only the hot water in the tank or for both the hot and cold water?
Hi, this is Jerica from InSinkErator® Customer Service. All InSinkErator filtration systems filter both hot and cool/cold water if used with a hot and cool faucet. If you have questions, please do not hesitate to contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2016-04-09
Does the F2000S or F1000S filter systems work with the SST model hot water dispenser?
Hi Anonymous, This is Jim with InSinkErator. The F1000S and F2000S are compatible with the SST hot water dispenser. Both the older SST and our newer HWT hot water dispensers share the same connections. I hope I have been able to answer your question today. If you have any other questions, please feel free to contact our AnswerLine at 800-558-5700. Thank you.
Date published: 2014-02-15