The Power Cord Kit is easy to install and includes a three-foot UL Listed cord, strain relief clamp, wire connectors and installation instructions. Once installed, disposer plugs directly into a standard wall outlet. This genuine InSinkErator® product meets Underwriter Laboratories Inc. SPT-3 category for insulation thickness and moisture resistance.
Out of Stock
Reviews / Q&A
Power Cord Kit is rated out of 5 by 1.
Rated 1 out of 5 by DDDD from Charging extra for essential parts I am replacing my current Bager .5 HP as it is no longer functional after only 3 years of minimal use as I compost vegetable material and eat little meat, not too much is put through the disposal. The electrical wires became unconnected inside the unit and though I was able to reconnect them by removing the metal plate on the bottom for access but the "red button" overload protector, which was barely attached by a flimsy clip, became unattached, inaccessible, and unusable. Now to get a new working unit you must buy an "accessory" power cord.
Date published: 2016-08-17
is the strain relief clamp sold separately?
Is the strain relief clamp that's part of the power cord kit sold separately? Or is the only way to get the clamp to buy the entire kit? I only need the clamp piece here, but have only been able to find the kit in stores. Thanks!
Hi kedrowsk, This is Belle with InSinkErator. The strain relief clamp is not sold separately from the power cord kit. The size of the strain relief clamp is 3/8 inch and is generally available at any local hardware stores. If you have any other questions, you may contact the AnswerLine at 1-800-558-5700. Thanks.
Date published: 2014-06-28
why are the wire colors different from the directions?
Hi, this is Jerica from InSinkErator Customer Service. We use different black wire combinations (black w/ white stripe, black w/ yellow stripe) as part of our visual factory. Overloads come to the line with the black wire on them and they can tell by the wire what unit it goes into by the wire color combo as a double check to the part number. Per the Cord Kit instruction, one wire (the one with the ribs) will always connect to the white wire. Across all our disposer lines, there will always be a solid white wire and a black or black wire combination. Per the Cord Kit instructions the smooth Cord Kit wire will then connect to the black. On all our disposer this wire will be either solid black or a combination of black and another color; currently either Black/White or Black/Yellow, depending on model, but it will always contain black to indicate that it is the black wire as per the Cord Kit instructions. If you have questions, you may contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2015-01-03
My insinkerator stopped working.
It was working fine. When I turned on the switch to dispose of something else it was dead.
Hi, this is Jerica from InSinkErator® Customer Service. I do apologize for the inconvenience that you encountered with your disposer. Our customer’s experience and satisfaction with our products are very important to InSinkErator and I would like the opportunity to assist you with this. Kindly send an email to [email protected] with your complete contact information and serial number of your disposer and I will get in touch with you. Thank you.
Date published: 2015-11-28
what guage is the wire? 14 or 16?
is the wire 14 or 16 guage?
Hi, this is Jerica form InSinkErator Customer Service. The power cord is a 16 gauge wire. If you have questions, you may call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2014-11-08
Is this the CRD-00 model cord? Will this cord work with the Evolution Compact Pro disposer?
Hi this is Jerica from InSinkErator Customer Service. Yes, the CRD-00 will work with any InSinkErator disposers. If you need further assistance, you may respond to this thread or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2014-05-17