Steamin' Hot H-SH10-SS Instant Hot water Dispenser and Tank is the most affordable instant hot water dispenser with easy push-button activation and modern design. This model features an easy push-button technology which includes a unique HOT100 2/3 gallon stainless steel tank that delivers up to 60 cups per hour of near-boiling water. It has a modern chrome design that complements today’s popular kitchen faucet styles. Model offers tool-free tank connections and dry-start protection for installation convenience.
Out of Stock
- Hot Only – Dispenses near-boiling water
- Includes 2/3-gallon hot water tank
- Easy to adjust temperature control
- Tool-free tank connections and dry start protection to ease installation
- 1-Year We Come To You ® In-Home Limited Warranty
- 115 volts, 750 watts, 6.25 amps
- Available in chrome
- Unit not for commercial/industrial use
|Capacity||2/3-gallon tank dispenses near-boiling water|
|Electrical||115 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug|
|Thermostat||Snap-action, adjustable thermostat|
|Insulation||Meets U.L. 94HF-1 flammability specification|
|Recommended Pressure||30-125 psi|
|Shipping Weight||Approximately 7.4 lbs|
|Required Hole Diameter||1¼" - 1½"|
|*InSinkErator® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.|
Installation Care and Use Manual
Reviews / Q&A
Is it normal for the dispenser to dribble steaming hot water periodically throughout the day?
Hi, this is Jerica from InSinkErator® Customer Service. A rumbling or gurgling sound is perfectly normal and is simply the tank adjusting to maintain its set temperature. This sound will occur periodically throughout the heating cycle. A 2/3 gallon stainless steel tank has a heating cycle of approximately every 2 hours. For further inquiries, please do not hesitate to contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2018-01-13
Is the dispenser supposed to be hot to the touch when not in use?
Hi, this is Jerica from InSinkErator® Customer Service. The faucet assembly should not be hot. As for the hot water tank, it would be warm to the touch. As long as the tank is plugged in, it will maintain the temperature of the water based on the Thermostat setting so that the water will be near boiling when dispensed. For further inquiries, please do not hesitate to contact us through [email protected] or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.
Date published: 2018-01-13