Indulge Contemporary is our finest line of instant hot water dispensers for use with our Stainless Steel Tank (sold separately) for filtered steaming hot water and cool drinking water all in one system. The contemporary design, in an array of beautiful designer finishes, will complement any kitchen. Designed for use with the re-engineered InSinkErator Stainless Steel Tank and Filtration System, enjoy hot or cool, filtered water right when you need it - now.
Out of Stock
- Hot and Cool — Dispenses steaming hot and cool drinking water
- Graceful high-arching spout swivels for greater convenience and stylish integrated levers provide a dramatic look
- The hot lever automatically shuts off while the Stay-On™ cool lever remains on for easy use
- Durable all brass dispenser construction
- 5-Year We Come To You™ In-Home Service Warranty
- NSF® listed
- For use with InSinkErator's Stainless Steel Tank and Filtration System
- Available in several designer finishes
|Hot Valve||Instant, self-closing|
|Cold Valve||Manual Return|
|Shipping Weight||Approximately 4 lbs.|
|Required Hole Diameter||1 1/4" - 1 1/2" (standard)|
|For use with InSinkErator Hot Water Tank and F-1000S Filtration System (sold separately)|
|*InSinkErator® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.|
Installation Care and Use Manual
Reviews / Q&A
Indulge Contemporary Hot/Cool Faucet (FHC1100) Biscuit is rated out of 5 by 180.
Rated 4 out of 5 by precasmom from Like I've had this before and had installed in our new home. However the spout sprays water everywhere, unlike our previous one. We are working with builder to correct.
Date published: 2018-04-22
Rated 5 out of 5 by Harry1621 from Great product We love this proucct. It looks sharp and it’s performance is outstanding.
Date published: 2018-04-14
Rated 1 out of 5 by Dbltake67 from A product designed to cost you This product is not well made and the manufacturer does not offer parts to help with repairs. The unit has a tendency to leak from the base and Insinkerator chooses to make you replace the entire water dispensor at a cost of $400. This is the second one I have seen in a month and the first customer had me remove the unit. In this case I ordered the parts after advisiing the client of the time it will take to install. This is a caution to the typical homeowner...this product will cost you money down the line. I don't see how to justify the expense and the follow-up repairs. Read all the review and I think you will see of what I am speaking. Good luck.
Date published: 2018-03-14
Rated 5 out of 5 by Rob67 from We like the tandem stick control valves. First unit we owned lasted 8 years and then had cross-over leakage from hot water to cold water lever base. Cold never leaked to hot water valve. Need to fix that phanomena which is probably just a valve seal in the hot water valve and a valve repair kit would fix the job but is not available.
Date published: 2018-03-03
Rated 5 out of 5 by Bill91234 from Wears out in 8 years and requires working in incredibly tight spaces to install. This faucet is not a lifetime buy. Ours worn out in 8 years. You have to work from the bottom of the counter to install or remove it. This means working in a 12 inch deep by 2 inch wide gap between the sink basin and the cabinet wall. You have to hold a metal plate over a bolt, pull the faucet down, and thread a nut on the boldt and then screw it up, while holding the faucet facing to the correct direction. I hope they redesign it for above the counter installation like other faucets such as the Grohe. The levers of the faucet and the pistons they push down wear out. No way exists for replacing these items. I can replace most faucet valves from above the counter using a kit bought from Home Depot or online. I want the same for this faucet.
Date published: 2018-02-22
Rated 2 out of 5 by PlumberJohn from Love the instant hot but having problems with the dispensers. I'm a service plumber and have installed these systems for years but lately I am running into a rash of the HC-1100 leaking at the base of the leavers. This is occurring on both the hot and cold leavers. I have now found myself in my customer's position paying $350.00 for the dispenser and not being able to repair it. My personal system is less than 7 years old.
Date published: 2018-02-14
Rated 1 out of 5 by David88 from New Faucet Does NOT Work Well I purchased this faucet after having the same unit for 11 years. The original unit functioned very well until a seal in the lever began leaking water four months ago. This replacement unit is very bad. The hot water comes out extremely fast and the cold water comes out very slow. I have tried to regulate the water flow through my water line and it doesn't make a difference. I called customer support and after spending many minutes on the phone with them describing my issue, their advice was, "Call a plumber." I will not do business with Insinkerator in the future. Customer service has been very unhelpful on this issue, and other issues in the past.
Date published: 2018-02-02
Rated 5 out of 5 by RetiredGuy00 from Nice Remodel Addition Having smokin’ hot water may not be for everyone, but we have used it for everything from making tea to cleaning off dishes. It’s useful for adding hot water to your cooking as well. However, there is a caveat. Originally,we bought this for the cold water side, hoping to save on constantly opening the refrigerator door to access cool water. We have strong chlorination in our city water making it awful to drink. Unfortunately, you will need to also purchase a prefilter if you want to eliminate this problem. That said, it’s not a bad thing as we now have tasty and handy water at our fingertips for cooking or drinking that is much better than our sink faucet.
Date published: 2018-01-27
is the cartridge replaceable?
The water filter for the cool water side is replaceable.
Date published: 2014-02-22
How cold is the water supposed to be? I feel like ours is only room temperature at best. NOT what I was expecting.
If you want COLD water, you need to buy the part that makes it cold just like you have the part that heats it up. Otherwise, your cold water is only room temperature.
Date published: 2016-12-24
Blowing air out halfway through filling cup, why?
Try turning down the heat on the heater. I had it on all the way high and it would spit out air in between. I think the water may have been boiling or steaming and the pressure was a build up of air in the tank getting pushed out. I turned it down a bit and it stopped. Maybe that will work for you too?
Date published: 2016-11-26
I broke blue tube inlet by accident when I removed the old tank. Am I able to replace the blue tube and where to get this part?
Not sure what you mean by the blue tube "inlet", but the end that connects to the tank should have a push-to-release type fitting. If the tube broke instead of bending, then it probably needs replacing anyway. Any hardware store should sell tube by the inch. You may need to buy another connector for the end if that's what is broken. The tube and the connectors are sold separately.
Date published: 2017-01-21
is this faucet rebuildable?
I have the Contemporary in Chrome and the cold water valve leaks whenever it is used. JUst replaced the heating unit and after a week with no water the dispenser leaks from the base of the valves primarily the cold water side. The system was installed in 2005 I think.
I tried so many times to extend the life of the faucet. Finally I called insinkerator and they said you cannot buy individual pieces for the faucet to fix it. you need to completely replace it. However, they offered me a 60% discount if I bought it through their site within one week. Since the cold water was dripping constantly I really had no other choice. I am no plumber, but was able to replace it myself, so no expensive installation costs.
Date published: 2015-10-03