This InSinkErator® Involve™ Series system, which includes the View instant hot water dispenser and re-engineered Stainless Steel Tank, provides 200°F near-boiling water for a variety of uses. Transitionally designed, the Involve View complements both soft contemporary and traditional design styles. Enjoy hot water right when you need it - now.
Out of Stock
- Includes 2/3 gallon Stainless Steel tank that delivers 60 cups/hour of near-boiling 200°F water
- Compact all metal dispenser construction
- InSinkErator 3-Year We Come To You® In-Home Full Service Limited Warranty Covers parts and labor
- UL listed
- 115 volts, 750 watts, 6.25 amps
- Available in two finishes: Chrome and Satin Nickel
|Capacity||2/3-gallon hot water tank dispenses 60 cups of 200˚F water per hour|
|Electrical||115 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug|
|Thermostat||Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F)|
|Hot Valve||Instant, self-closing|
|Shipping Weight||Approximately 8.5 lbs.|
|Required Hole Diameter||1- 1/2" (standard)|
Installation Care and Use Manual
Reviews / Q&A
Involve H-View - Chrome is rated out of 5 by 190.
Rated 4 out of 5 by MichelleK from hot spot This is the second one I've owned. this one doesn't put out as much water as my last one.
Date published: 2017-07-14
Rated 5 out of 5 by MommyT from I love having hot water for Tea whenever I want it. The design and the way the tap works is great. Very happy with this. I love having hot water for Tea whenever I want it. The design and the way the tap works is great. Very happy with this.
Date published: 2017-07-03
Rated 4 out of 5 by tommyt from Good For What It's For We purchased from HD as an open box item at a pretty good discount. We installed this to replace an older model that had started leaking and then, quit working. Install was just a few minutes, maybe half an hour. It works and, if it lasts for more than two years we'll be happy. We use it to make coffee in a french press mostly. The one flaw we've seen is, even at it's highest setting we aren't getting 200 degrees. About 180 sometimes 185. I'm going to look for a time for this so that it will only be heating in the morning and save electricity.
Date published: 2017-06-30
Rated 5 out of 5 by RockinRobin from very nice product We were replacing an older white plastic hot water dispenser (sort of clunky design) and we are very happy with the sleek design that is easy to use and doesn't get in the way of using the sink for other purposes. Love it!
Date published: 2017-06-20
Rated 5 out of 5 by R12isbad from Great product Installation was simple and straight-forward. The only improvement I can think of, would be, swap out the hard copper lines with flexible braided stainless steel.
Date published: 2017-06-17
Rated 5 out of 5 by StephenS from Installation Sweet product. Easy to install for the experienced. Wish product would have come with water line, tee and fittings though.
Date published: 2017-06-17
Rated 5 out of 5 by Gingenbarb from This is the third unit we purchased We have the same model in three homes and love the convenience instant hot affords us for beverages. We are prolific hot tea drinkers and use the instant hot insinkerator throughout the day. Highly recommended.
Date published: 2017-06-03
Rated 5 out of 5 by dp73 from This product works as advertised. This product works as advertised, Brushed nickle finish is attractive and blends with other kitchen fixtures. I would recommend this product.
Date published: 2017-05-29
How long is the threaded section?
I will be installing on top of a granite counter top. I want to be sure that there are an adequate number of threads below for mounting. What would be the maximum thickness of the counter top?
I believe you should ask the plumber. But I have granite for a counter top and have no problems what so ever. mdw
Date published: 2014-02-22
Any solution for sputtering?
My unit is 6 years old and recently, when I dispense water, it almost immediately starts sputtering, rather than flowing out normally. Used to be that it would flow normally, except when I was filling a large pan and then toward the end, it would sputter. But now it starts with the sputtering almost immediately. Anything I can do?
I would try to turn the temperature down a little.
Date published: 2017-02-04
Is there copper tubing for the hot water?
Our last hot water dispenser started to leak because of the plastic tubing. What is the tubing used to carry the hot water from the tank to the faucet? Can we have a copper tubing option? Thanks!
Sorry to hear that! All three of our tank connections are plastic. Our unit is new, so no leaks. Oddly, it has a 1/4" copper line MOST of the way from faucet to tank... but they connect through a short plastic tube. Odd! :-(
Date published: 2015-09-05
Will the hot water dispenser install with sink under granite countertops?
I have seen reviews stating that an extension is needed and the part was not long enough.
Date published: 2016-11-26
Is it imperative that you must use a sink top switch if you only have one electrical outlet and the disposal is using one of the recepticals?
Yes, it we had to do that. We bought the Insinkerator top sink switch to give us an extra outlet. Unfortunately, this will take up one of your accessory holes. We were lucky in that we have a sink with 4 holes: one for the faucet, one for the dishwater aerator so we used the other two for the Insinkerator top switch and dispenser. Good luck!
Date published: 2017-05-13