®/TM ©2026 InSinkErator. All rights reserved.
Of course, you just need to make sure the diameter of the hole can fit the faucet that you wish to purchase. Look at the faucet spec sheet for further detail.
Yes. InSinkErator offers four different additional dispensers, the HC3300, H3300, HC1100 & GN1100. These dispensers sit neatly alongside your main faucet and dispenses instant filtered near-boiling water. In addition to the near-boiling water function, the HC3300 & HC1100 dispenses filtered cold water at the pull of a lever.
No. Our instant hot water dispensers eliminate the need for a kettle. With our very own digital adjustable thermostat, you can go as low as 88°C for delicate leaf teas or up to 99°C to prep and cook your daily meals.
Yes. All InSinkErator instant hot water dispenser faucets have a full 360° swivel.
The only maintenance required is changing filters, so use the dispenser daily like any other faucet and change the water filter at least every 6 to 8 months.
Simply follow the four easy steps on your filter:
Our tried and tested InSinkErator water filters improve the taste of cold drinks by filtering out hardness, limescale and other impurities. Exclusively designed for the steaming hot water system from InSinkErator, our filters deliver the clean water you demand and represent excellent value.
We recommend that you change your filters every 6 to 8 months.
It is hard to give exact figures as each area will have different water hardness levels, so we recommend at least every 6 to 8 months or when you notice the taste in the water start to change.
Click here if you wish to buy more filters
Except for the obvious shape difference, the functions of the paired taps are the same and all four use our improved Digital Tank with an adjustable thermostat of 88°C to 99°C.
In a kitchen faucet this powerful, safety is critical. The whole family needs to enjoy the everyday luxury of an instant hot water system, from children right through to grandparents. The safety spring lock push down lever on the steaming hot water handle immediately springs back into place as soon as it is released by the user — meaning that near-boiling water is never left running unattended. This also dramatically reduces water waste by ensuring that you only ever use the amount of water that you actually need.
We have also refined the flow of instant hot water dispensers as it leaves the faucet. As you pull the lever to dispense the hot water, you'll see an extremely fine flow that is designed to prevent spraying and spitting that could cause scalding or burning.
If the water form your InSinkErator instant hot water dispenser is too hot or too cold for your liking, you can easily adjust the temperature on your InSinkErator hot water tank.
Before you get started there are a couple of points to note.
Changing the temperature on your hot water tank is a straightforward process - just follow the simple steps below.
Check the temperature on your tank.
Looking at the front of your tank you'll see a digital dial on the front with two arrows, one pointing up and the other pointing down. This is where you can control the temperature of the water in the tank. If the water is too hot, push the down arrow and turn on the hot water tap for about 20 seconds to allow cold water to enter the tank and allow the water to reheat to the new setting. Follow the exact same process if your water is too cold, but use the up arrow instead.
Continue adjusting the temperature in small increments until the water reaches a temperature you're happy with.
If your InSinkErator instant hot water dispenser doesn't come with a Digital tank, you'll follow the same process but instead of arrows on a digital thermostat, you'll have a twist dial that you can turn up or down.
If adjusting the temperature on the tank still doesn't fix your issue
If your water temperature still hasn't improved, check that all of the connections are tight and secure. If after this you're still experiencing problems, please contact us for further assistance.
If water or steam is spitting from your InSinkErator instant hot water dispenser, don’t be alarmed. There are a few straightforward fixes.
First, it’s important to note that spitting is normal upon the initial start-up of your instant hot water dispenser. If your dispenser has been installed longer than a few days, please take a look below.
Is the water temperature in your tank too high?
If the water temperature on your tank is set too high, it will begin to boil, and this can cause spitting from the tap faucet. Look at our help article on how to adjust the temperature of your tank.
Check the connections
If changing the temperature of the water in your tank doesn’t do the trick, then you might have a lose connection. Check all of the connections from the tank to the faucet and make sure they are tight and secure.
Clean the aerator to remove any hard water deposits or debris
Turn off the hot water tank and run the water from your tap until it’s cool. Unscrew the aerator from the end of the spout and clean it by running water through it. Place the aerator on the spout and turn the tank back on.
If after this you're still experiencing problems, please contact us for further assistance.
Need additional help? Contact Us